The AP 6511 is expressly designed for one of the most challenging wireless LAN environments – dormitory and hotel guest rooms. Standard service personnel can install the AP 6511 in minutes using existing category 5 or 6 cabling already in the walls. The installation is predictable and repeatable – two key reasons why the AP 6511 will dramatically lower the installation time and cost of a room’s wireless LAN. The AP's sleek "hide in sight" design and minute size match the decor of any room.
The AP 6511 includes intelligent self-optimizing controller AP code – enabling a small property to gain the benefits of a central controller – automatic adoption, central configuration and status, as well as automatic RF management, without the cost of a dedicated RF switch. For larger properties and facilities, Zebra’s WiNG-based RF switches can manage the AP 6511 , for very high scalability and seamless integration with other indoor and outdoor 802.11n access points.
FULL 802.11N PERFORMANCE WITH STANDARD 802.3AF AND DUAL BAND SUPPORT
Simplify and reduce the total cost of installation using standard Power-over-Ethernet (PoE). Operate in either 2.4Ghz or 5.0Ghz frequency bands to support 802.11b/g/n or 802.11a/n wireless LANs.
ENHANCED MOBILITY AND SECURITY
Support fast, secure roaming and rate scaling. Pre-emptive roaming and load balancing are supported when connected to an RF Switch to increase reliability and network resilience. This unique multi-purpose device can execute and enforce the IDS/IPS security policies configured in the wireless switch, and can also be utilized as a 24x7 dedicated sensor with wireless IPS from AirDefense solutions.
MODULAR INDUSTRIAL DESIGN FOR FLEXIBILITY
The mounting bracket features six unique hole patterns to match most telecom plates worldwide. A keystone, snap-in port provides a fast method to connect any secondary cabling behind the wall to the AP. If the snap-in port is not used for a secondary cable, it can be dedicated as a switched Fast Ethernet port. To further add modularity and flexibility in network design, a three-port Fast Ethernet Module can be field installed via a snap-in access port.
Available Mount Configurations: Mount over any structured wiring telecom box, or on a flat surface.
LEDs: Two single color status LEDs; power, error, packets, operating frequency
Weight: 1 lbs / 0.5 kg
Dimensions (HxWxD): 5" x 2.95” x 1” (12.8cm x 7.5cm x 2.54cm). 12oz (0.34Kg)
Physical interfaces: 10/100Mb auto-sensing via 8-pin header 10/100Mb auto-sensing
Integrated Power Over Ethernet Support: Standards-based IEEE 802.3af
Operating Voltage: 802.3af supply: 48 VDC @ 12.95W (typical), 36 VDC to 57 VDC (range)
Operating Current: 0.170w (typical)
Maximum Transmit Power Settings: 20dBm
Network Standards: 802.11a, 802.11b, 802.11g, 802.11n
Operating Channels: 5GHz: All channels from 4920 MHz to 5825 MHz 2.4GHz: Chan 1-13 (2412-2472 MHz), Actual operating frequencies depend on national regulatory limits
Layer 2 and Layer 3: 802.11-802.3 bridging, 802.1q VLAN tagging and trunking, Dyn DNS, DHCP server/client
Management: Independent management via SSH, Telnet. Adopted management by Controller AP available at first release. Adoption by RF switch available in future software release.
Data Rates Supported: 802.11b/g: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, and 54Mbps 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54Mbps 802.11n: MCS 0-15 up to 300Mbps
Operating Bands - EU:
FCC EU 2.412 to 2.462 GHz 2.412 to 2.472 GHz 5.150 to 5.250 (UNII -1) 5.150 to 5.250 GHz 5.725 to 5.825 (UNII -3) 5.150 to 5.350 GHz 5.725 to 5.850 (ISM) 5.470 to 5.725 GHz (Country Specific) Japan 2.412 to 2.484GHz 4.900 to 5.000 GHz 5.150 to 5.250 GHz
Wireless Medium: Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM), and Spatial Multiplexing (MIMO)
Security: Stateful Firewall, NAT, 802.1x, 802.11i, WPA2-CCMP (AES), WPA2-TKIP, WPA-TKIP, Rogue Detection, Secure guest access (HotSpot)
QoS: 802.11e, 802.1p, DiffServ, TOS
EMC: FCC Part 15 Class B
Environmental: EU RoHS Directive 2002/95/EEC
Electrical Safety: EN 60950-1
Human Exposure EMF: EN 50385, FCC Part 2, OET Bulletin 65, RSS-102 Issue 2
Electrostatic Discharge: +/- 15 kV (Air), +/- 8 kV (contact)
Operating Humidity: 5 to 95% RH (non condensing)
Storage Altitude: 15, 000 ft./4572 m
Operating Altitude: 8, 000 ft./2438 m
Operating Temperature: -4F to 122F / 0C to 50C
Storage Temperature: -40F to 158F / -40C to 70C